Need Help and Suggestions on Frame up Ranger Restoration.

[TXTruck]

Hello,
I you can see I need some help with my frame up restoration.
I got the seating ,wood bed and heating figured out.
Will install heater,when I get some help.It pretty heavy.
Any suggestions would be greatly appreciated.
TXTruck

 

[TXTruck]

OH,I almost forgot,Should I mount the winch on the front or the back?
Here is a picture?
TXTruck

 

[Joeychgo]

Nice seats....

 

[TXTruck]

Thanks Joey,
The front one is special order and rear is out of a 1966 dart four door.

 

[old tired rebel]

Put the wench under it to piss off the purist.

 

[stansgray03]

Don't forget the cooler for the beer.

 

[bremereric]

Put the stove out back and add a smoker tower for some fine BBQ

 

[NioMarvin83]

It sounds like you have a good start on your restoration. If the heater is heavy, you might need a second person or a hoist to help lift it into place.

Here are some things to check before installing it:

Mounting Points – Make sure the brackets and bolts line up so the heater sits correctly.
Hoses and Wires – Check that all hoses and wires are in good shape before connecting them.
Test Before Final Install – If possible, connect it and test it before fully mounting to avoid extra work later.
If you need help with anything else, feel free to ask. Hope the project goes well!