Need help please. My A/C compressor cycles when the switch is turned off. Works correctly with A/C is turned on. Any help with this issue would be very helpful. Thanks, Clint.
It cycles when the system is off or any other button is pushed. Works as it should on ac or max ac. Relay at the left hood hinge is getting a signal from somewhere.
1988 w150 318 automatic. Everything is factory on the truck.
That's what I was thinking myself. I can't figure out what is sending a ground signal to that relay by the left hood hinge. I have even put a new climate control switch in the dash.
I have done that. If the AC is on it works properly. If I unplug that pressure switch with the AC on it starts to cycle. I don't know what I am overlooking.
Is this something you have had for awhile? Reason for asking is the mentioning of climate control. True climate control systems function differently of normal systems in that some don't really shut down.
Not sure a cheap Chilton type manual even gets into this.
Aldata doesn't cover it very well either. Why would it need to cycle the system when turned off? Going to rebuild the system after I swap in the 360. Might find something then. My 87 didn't do this.
I am having difficulties finding anything in the pickup line with climate control.
Std. air should have nothing to the compressor if not in a/c or defrost mode.
Could be a broken control board in the switch it's self is the cause of the problem. But will keep looking. I have an auto manual or two left to go.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.