devildog80
Member
1984 Jeep Grand Wagoneer, 401 (.030 over), Edelbrock clone 1406 4 bbl carb on Edelbrock AMC Performer aluminum intake #2131, 727 auto, Selec-trac NP229, AMC 20 REAR - D44 FRONT - WT - 3.31 ratio, 4" high arc spring lift.
Rolling project currently licensed, insured, and driving. No problem running with traffic on the interstate, as I was building the truck primarily as a tow vehicle, for highway driving (95%) hauling gear with camper behind. The truck is safe, solid, and capable. Engine, transmission, axles, steering, all run smooth. Brakes, brake lines, hardware, have all been refreshed, repaired and work perfectly. New set (x4) 235/75R/15 LT tires with less than 1k miles. New Bilstein shocks front & rear.
Lots of hours already into project getting windows, seats, instruments/gauges, mechanicals checked & working. Surface rust only as truck is very solid with minimal body work needed & paint on outside (if wanting a show truck), and ready for interior refurbish.
Asking $12,500
Comes with many loose original parts I saved, lots of extra parts it came with to me including original 727 transmission case, and others since I have had it here and will pass along.
Apache Junction AZ
Build threads, similar but some have more posts than others.
84 Grand Wagoneer Revival - Full Size Jeep Network
https://forums.ifsja.org/forum/tire-...goneer-revival
84 Grand Wagoneer Revival
PM me for more pics or information
]
20240516_142352[/url] by https://www.flickr.com/photos/195585920@N02/]Scott Weckerly[/url], on Flickr
]
20220410_134527[/url] by https://www.flickr.com/photos/195585920@N02/]Scott Weckerly[/url], on Flickr
]
20220416_125900[/url] by https://www.flickr.com/photos/195585920@N02/]Scott Weckerly[/url], on Flickr
]
20230930_131649[/url] by https://www.flickr.com/photos/195585920@N02/]Scott Weckerly[/url], on Flickr
]
Bilsteins - Rear[/url] by https://www.flickr.com/photos/195585920@N02/]Scott Weckerly[/url], on Flickr
Rolling project currently licensed, insured, and driving. No problem running with traffic on the interstate, as I was building the truck primarily as a tow vehicle, for highway driving (95%) hauling gear with camper behind. The truck is safe, solid, and capable. Engine, transmission, axles, steering, all run smooth. Brakes, brake lines, hardware, have all been refreshed, repaired and work perfectly. New set (x4) 235/75R/15 LT tires with less than 1k miles. New Bilstein shocks front & rear.
Lots of hours already into project getting windows, seats, instruments/gauges, mechanicals checked & working. Surface rust only as truck is very solid with minimal body work needed & paint on outside (if wanting a show truck), and ready for interior refurbish.
Asking $12,500
Comes with many loose original parts I saved, lots of extra parts it came with to me including original 727 transmission case, and others since I have had it here and will pass along.
Apache Junction AZ
Build threads, similar but some have more posts than others.
84 Grand Wagoneer Revival - Full Size Jeep Network
https://forums.ifsja.org/forum/tire-...goneer-revival
84 Grand Wagoneer Revival
PM me for more pics or information
]
]
]
Last edited: